We work throughout the territory of Ukraine

Polymer mass for installation and repair

What is QUIKSET?

This is an innovative, two-component light and strong polymer mounting compound based on fast-hardening resin. It is used for installing wooden, plastic and metal support structures of various shapes and cross-section profiles in the ground.

(about 10 cm) allows to reduce labor costs.

1 package = 1 structural element. Small weight - easy and convenient transportation.

Fast preparation time of the working mixture - 20 seconds

No additional working tools are required.

Electricity and water are not required

There is no need to clean and dry your clothes afterwards works

Accuracy and aesthetics. The lawn completely hides traces installation

Comfortable and efficient


installation within a few minutes


one package replaces several bags of cement mixture


stronger than the soil in which is used


Protects metal from corrosion, and wood from rotting. Does not absorb water and excludes capillary penetration.


Resistance to dynamic loads. Does not crack with significant temperature fluctuations.


Possibility of repeated use of structures without aesthetic losses

Consumption of QUIKSET for one fastening (pcs.)

300 700
* 60 см 90 см 60 см 90 см
** 10 см 15 см 10 см 15 см 20 см 25 см 15 см 20 см

The size of the structure

10 x 10 см - 1,0 - 0,5 1,5 2,0 1,0 2,0
9 x 9 см - 1,5 - 0,5 1,5 2,0 1,0 2,0
7 x 7 см 0,5 2,0 1,0 1,0 1,5 2,5 1,5 2,5
5 x 5 см 1,0 2,0 1,5 1,0 1,5 2,5 1,5 2,5
6 x 4 см 1,0 2,0 1,5 1,0 1,5 2,5 1,5 2,5
Ø 5 см 1,0 2,5 1,5 1,0 1,5 2,5 1,5 2,5
Ø 6 см 1,0 2,0 1,5 1,0 1,5 2,5 1,5 2,5

* - Depth of the hole (at least 40 cm)

** - Hole diameter

QUIKSET is a chemical product, and its chemical reaction depends on the temperature conditions of the environment. This has a direct effect on the speed and volume of expansion of the mounting mass.

For installation and repair:

Garbage containers

Wooden fences

Gazebos and verandas

Animal enclosures

Swings and simulators

Canopies and shelters

Panel fences

Road signs

Sports bars

Gates and wickets

Information boards

Terraces and pergolas



Masts and masts

Bird feeders

Park lamps

Garden composters

Installation process


a hole of a given diameter and required depth (see the table on the product label or in the booklet)


Align and fix the structure in the desired position; wear protective gloves


With a vigorous movement, pull both ends of the bag in opposite directions

MIX (20 seconds)

both components, energetically redistributing the content inside packages (but no more than 30 seconds)


in the designated place.


content of the bag in the hole, distributing evenly around construction element.

WAIT (3 minutes)

before the end of the process of expansion of the mounting mass and the beginning of it curing

REMOVE SURPLUS (after 10 minutes)

if necessary, cut with a shovel, knife, etc.


the place of installation, covered with soil to protect against splashes direct sunlight.


can be applied after final curing (after 4–5 hours).

Traditional methods

Ask a Stati-Cal Expert a Question
Send us your questions and we will respond within a business day

Stati-Cal Technology Consultation Request Form
Send us your questions and we we will answer during the working day